<
>
Makinopc M26D-20 CNC Machining Tool Setter 20mm Z Axis Measuring Presetters Stainless Steel Aluminum Shell 0.001mm Repeatability
Brand Name:
Makinopc
Place of Origin:
Guangdong, China
Minimum Order Quantity:
1 piece
Price:
$49-79 / piece
Product Details
| Weight (kg): | 1.5 | Video Outgoing-inspection: | Provided |
|---|---|---|---|
| Machinery Test Report: | Not Available | Warranty: | 1 Year |
| Machine Type: | Milling Machine, Lathe Machine, Turning Machine | Products Name: | Automatic Tool Setter And Broken Tool Detector |
| Material: | Aluminum/Stainless Steel | Contact Force: | 2.5N |
| Rated Voltage: | DC24V/20MA | Repeatability: | 0.001mm |
| Service Time: | 3 Million Times | Electric Shock Life: | 5mm |
| Water Proof And Oil Proof: | IP67*100%, Oil-proof Sealing Performance | Model 1: | Normally Open |
| Model 2: | Normally Close | ||
| Highlight |
Shell Tool Setter,Presetters Tool Setter,20mm Steel Tool Setter |
||
Product Description
Products Description
Makinopc M26D-20 Tool Setter Broken Tool Detector from Chinese Factory
This tool setter M26D-20 can completely replace the original METROL‘s TM26D-20. It is mainly used for CNC machining centers, engraving and milling machines, and high-gloss machine, glass and jade machine and other equipment tool measurement, wear and damage detection, detection and knife breakage detection; An alarm signal will occur when the stroke is exceeded, Breakage accidents can be prevented. We are Chinese original factory with best prices. Welcome your bulk orders!
Product Paramenters
Reduce scrap and increase productivity by accurately setting and measuring your CNC cutting tools.
We offer customization services, such as engraving logos on tool setters. Please select either the aluminum or steel version of the tool presetter. Both offer the same level of precision, differing only in material. The steel version is more durable. Two types of output signals are available: normally open and normally closed. Please specify your preference when placing an order. Thank you!
M26D-20 (Steel Version) | ||
Product Name | Automatic Tool Setter | |
Model | M26D-20 (Steel) | |
Diameter of cutter face | 20mm | |
The main body | Stainless steel | |
Contact site material | Tungsten carbide | |
Surface treatment | Grinding 4S mirror | |
Output mode | Normally open/normally closed | |
Pre-trip | Without | |
Stroke | 5mm | |
Repeatability | 0.001mm (condition: operating speed 50-200mm/min) | |
Contact life | 3,000,000 times | |
Protecting the structure | IP67*100% waterproof and oil-proof sealing performance | |
Contact force | 1.5N (installation must be vertical) | |
Contact rating | DC24V-20mA(MAX) (recommended value 10mA) resistive load Standard 5m oil resistant, 4.8 in 6 cores, tensile strength 30N, bend radius R7 | |
Cable material | PU | |
Protection tube | 8mm 304 stainless steel 1.5m long | |
Indicator lights | Normally closed LED lights are on when working | |
Installation hole spacing | 40mm | |
Net weight | 515g | |
Gross weight | 585g | |
Overtravel alarm signal | Output mode: NC normally closed (about 2.5mm from the detection signal) Contact voltage: DC24V-20mA(MAX) (recommended value 10mA) resistance load | |
MAKINOPC's tool setter for tactile tool measurement and tool breakage detection in CNC machining centres. Fast. Precise. Extremely robust.
M26D-20 (Aluminum Version) | ||
Product Name | Automatic Tool Setter | |
Model | M26D-20 (Aluminum) | |
Diameter of cutter face | 20mm | |
The main body | Aluminum alloy | |
Contact site material | Superhard alloy | |
Surface treatment | Grinding 4S mirror | |
Output mode | Normally open/normally closed | |
Pre-trip | Without | |
Stroke | 5mm | |
Repeatability | 0.002mm (condition: operating speed 50-200mm/min) | |
Contact life | 3,000,000 times | |
Protecting the structure | IP67*100% waterproof and oil-proof sealing performance | |
Contact force | 1.5N (installation must be vertical) | |
Contact rating | DC24V-20mA(MAX) (recommended value 10mA) resistive load Standard 5m oil resistant, 4.8 in 6 cores, tensile strength 30N, bend radius R7 | |
Cable material | PVC | |
Protection tube | 8mm 304 stainless steel 1.5m long | |
Indicator lights | Normally closed LED lights are on when working | |
Installation hole spacing | 40mm | |
Net weight | 406g | |
Gross weight | 464g | |
Overtravel alarm signal | Output mode: NC normally closed (about 2.5mm from the detection signal) Contact voltage: DC24V-20mA(MAX) (recommended value 10mA) | |
resistance load | ||
Details Images
Essentials of Tool Setter Programs
The following parameters need to be changed in the initial use of the tool setting macro program.
%
09020(AUTO-TOOL-LENGTH-MEASUREMENT)#510=-3.4(Center position of tool setting face in mechanical coordinate X-axis
direction)#511=-70.8(Center position of tool setting face in mechanical coordinate Y-axis direction)#100=1500(FIRSTFEED)First
speed #101=1200( SECONDFEED)Second speed
#102=511.(ZMAXTRAVEL) Total machine Z-axis travel distance #103=4(REMEASUREMENT ERROR) #104=0.05(TOOL MAX WEAR)
#105=50 (MAX DIAMETER)
#106=15 (OVER TOOL DIAMETERYOFFSET) #513=539.661 (OFFSET) tool to make up the position of the value of a positive number, such as
0 is a negative number is generally set to 0 #3003=1 (SINGLEBLOCKDISABLE) single-section switch is closed, here can be deleted
#512 = -350 (the first down knife) Position)
M99%
%
09020(AUTO-TOOL-LENGTH-MEASUREMENT)#510=-3.4(Center position of tool setting face in mechanical coordinate X-axis
direction)#511=-70.8(Center position of tool setting face in mechanical coordinate Y-axis direction)#100=1500(FIRSTFEED)First
speed #101=1200( SECONDFEED)Second speed
#102=511.(ZMAXTRAVEL) Total machine Z-axis travel distance #103=4(REMEASUREMENT ERROR) #104=0.05(TOOL MAX WEAR)
#105=50 (MAX DIAMETER)
#106=15 (OVER TOOL DIAMETERYOFFSET) #513=539.661 (OFFSET) tool to make up the position of the value of a positive number, such as
0 is a negative number is generally set to 0 #3003=1 (SINGLEBLOCKDISABLE) single-section switch is closed, here can be deleted
#512 = -350 (the first down knife) Position)
M99%
Installation of Tool Setter
1. Try to install it in the place where there are fewer iron chips and splashing water on the workbench.
2. It must be installed vertically to ensure that the bottom is flat so as not to cause a large error in precision.
3. After the wiring is completed, place the tool setting instrument in another place of the tool setting seat, and then fix the
correct position after testing the tool setting signal is normal.
4. Please correctly in the rated DC +24V 10% 20MA ((MAX) power supply range, to avoid overload burned internal components!
5. Power and signal lines in the 20N (2KG) below the tensile force, power line sheath metal pipe bending radius of R7.
6. If you need to use the blowing function, the use of air tube specifications for the outer diameter of 4MM, inner diameter
2.5MM, the recommended air pressure 0.3-0.6MPA.
2. It must be installed vertically to ensure that the bottom is flat so as not to cause a large error in precision.
3. After the wiring is completed, place the tool setting instrument in another place of the tool setting seat, and then fix the
correct position after testing the tool setting signal is normal.
4. Please correctly in the rated DC +24V 10% 20MA ((MAX) power supply range, to avoid overload burned internal components!
5. Power and signal lines in the 20N (2KG) below the tensile force, power line sheath metal pipe bending radius of R7.
6. If you need to use the blowing function, the use of air tube specifications for the outer diameter of 4MM, inner diameter
2.5MM, the recommended air pressure 0.3-0.6MPA.
Precautions for the Use of the Tool Setter
1. Please control the diameter of the tool below 20MM (speed and mechanical)
2.The speed of tool setting should be controlled below 50-200MM/MIN, The response of the electric appliance is related).
3. Please pay attention to clean the surface of the knife in the place where the blowing pipe can not blow, and do not accumulate iron chips.
4. Please do not rotate the head of the tool setting instrument by force, it may hurt the precision devices.
5. Install the blowing device correctly to prevent leakage and pipe bursting.
6. Use the ambient temperature in -25-70 degrees Celsius
7. When the high-pressure coolant and the water jet impacts the knife surface fiercely, please set up a protective cover
additionally.
8. Contact can not exceed the stroke of the knife instrument (stroke of 5MM), or damage to the internal precision devices
9. Please do not use your hands to violently press the surface of the knife to bounce up and down, so as not to damage the internal precision devices
10. The tool falls in the center of the knife surface as far as possible, after the end of the knife vertically lift the knife to
leave, do not leave horizontally!
2.The speed of tool setting should be controlled below 50-200MM/MIN, The response of the electric appliance is related).
3. Please pay attention to clean the surface of the knife in the place where the blowing pipe can not blow, and do not accumulate iron chips.
4. Please do not rotate the head of the tool setting instrument by force, it may hurt the precision devices.
5. Install the blowing device correctly to prevent leakage and pipe bursting.
6. Use the ambient temperature in -25-70 degrees Celsius
7. When the high-pressure coolant and the water jet impacts the knife surface fiercely, please set up a protective cover
additionally.
8. Contact can not exceed the stroke of the knife instrument (stroke of 5MM), or damage to the internal precision devices
9. Please do not use your hands to violently press the surface of the knife to bounce up and down, so as not to damage the internal precision devices
10. The tool falls in the center of the knife surface as far as possible, after the end of the knife vertically lift the knife to
leave, do not leave horizontally!
Product packaging
We usually use foam board with 3 cm thick to fill in all around the box inside to protect parts. We often use carton to pack the parts, but if it's too heavy, we'll use custom-wooden box to pack it.
Package : carton or wooden box
Lead time : 1-2 days
All products can be shipped around the world via DHL, UPS, FedEx, TNT and more. The package is safe and green. If you have any special needs, please let me know.
Company Profile
Founded in 2014, Shenzhen Muye Precision Control Electromechanical Co., Ltd. is a service-oriented enterprise integrating R&D, design and sales of CNC numerical control machine tools accessories, and the products currently put on the market mainly include CNC numerical control machine tools with automatic tool setting instrument, electronic handwheels, hand-cranked pulse generators, on-line measuring probes, band switches, spindle encoders, system panels, electronic handwheel accessories supporting programs, and the realization of automatic tool setting installation and debugging solutions. Commissioning solutions, etc.
Our factory is located in Songgang, Bao'an District, Shenzhen City, covers an area of more than 3,000 square meters, with 20 professional and technical personnel, 15 sets of testing instruments, two production lines. The production capacity reaches 100,000 units per month. We have exclusive patent design and own brand, and have won many quality certificates.
The products are widely used in Fanuc, , Mitsubishi, Fagor, Heidenhain, Bao Yuan, New Generation, HANUC, Guangzhou CNC GSK, open CNC, Kain Emperor KND, Nuoxin, Delta, a variety of PLCs, CNC machining centers, engraving machines, engraving and milling machines, drilling and tapping machines, EDM, milling machines, lathes and so on.
The company in line with the "customer first, integrity first" principle with a number of enterprises to establish long-term cooperative relations, warmly welcome friends from all over the world to visit and negotiate business.
Our Advantages
1. We specialize in the field of CNC machine tool accessories and have more than ten years of industry experience.
2. We have our own brand called Makinopc and exclusive patent design and quality certification.
3. We provide you with friendly English user manual or operation video for free.
4. We have 24 hours technical support by email or phone.
5. Warranty: 1 year free warranty, 2-3 years warranty at cost, and always provide free technical support.
6. We have no MOQ limit and accept OEM/ODM bulk orders.
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2: How to choose the appropriate model or specifications?
A:Based on your requirement and application, our professional engineers will offer you a detailed suggestions regarding
models and specifications.
Q3:Can I become your dealer?
A:Of course, we need partners to create value together.
Q4: Do you accept customized service?
A:Yes, we can provide not only standard products, but also customized service and solutions.
Q5: Do you have any MOQ (minimum order quality)limit?
A: For standard product, usually 1pcs/item. For the OEM order, need to communicate product solutions.
Q6.How long is the product shelf life?
A: Our product watranty period is one year.
Q7: How to proceed an order?
A: After buyer confirm the product&price is ok and ready to buy, order will be please tell us your delivery address, phone number, sometimes need email. Then we can draft the order and it will have a paying link.Online trading is safe and convenient.
Recommend Products
Product Highlights
Products Description Makinopc M26D-20 Tool Setter Broken Tool Detector from Chinese FactoryThis tool setter M26D-20 can completely replace the original METROL‘s TM26D-20. It is mainly used for CNC machining centers, engraving and milling machines, and high-gloss machine, glass and jade machine and ...
Related Products
MDP40 High Accuracy Wireless CNC Touch Probe 3D Edge Finder Measuring Sensor Kit for CNC Machines
Products Description MDP40 CNC Wireless Touch Probe for Digitizing, Part and Tool Setup Factory direct sales, quality guaranteed, fast worldwide shipping! Brief Introduction The MDP40 wireless probe uses optical signals and can be installed on most CNC lathes, machining centers, CNC grinders, and ...
ZCM009K Square Shaped Magnet for Pneumatic Air Cylinder Magnetic Reed Switch Sensor
Products Description Key Features Magnetic inductive proximity switches utilize a magnetic induction generator as a probe to detect the operating status of the object under test, thereby controlling the relay action. Magnetic induction sensors have the advantages of small size, high inertia and fast ...
Universal Mini Magnetic Proximity Sensor Magnet Part Adapted to M2 Screw 0.1Nm Torque ZCM004KH
Products Description Key Features Magnetic inductive proximity switches utilize a magnetic induction generator as a probe to detect the operating status of the object under test, thereby controlling the relay action. Magnetic induction sensors have the advantages of small size, high inertia and fast ...
Customizable M2.5 Hole Applicable Switch Magnets for Magnetic Proximity Sensor Long Range Magnetic Field Detection ZCM003KH
Products Description Key Features Magnetic inductive proximity switches utilize a magnetic induction generator as a probe to detect the operating status of the object under test, thereby controlling the relay action. Magnetic induction sensors have the advantages of small size, high inertia and fast ...
Request A Quote
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
